V13_IOL_NVMe_MI

V13_IOL_NVMe_MI_01.01.00_MCTPEndpointID.sh

Objective:

Verify an MCTP endpoint ID is returnedMCTP Get Endpoint ID test

Pass/Fail:

See test 1.1 in the UNH-IOL NVMe-MI conformance v13.0 testplan

V13_IOL_NVMe_MI_01.01.01_MCTPEndpointIDResp.sh

Objective:

Verify reserved bits of MCTP endpoint ID response are set to zeroMCTP Get Endpoint ID response reserved bits test

Pass/Fail:

See test 1.1.1 in the UNH-IOL NVMe-MI conformance v13.0 testplan

V13_IOL_NVMe_MI_01.02_MCTPPacketSeqNum.sh

Objective:

Verify MCTP packet sequence number functionalityMCTP Packet Sequence Number test

Pass/Fail:

See test 1.2 in the UNH-IOL NVMe-MI conformance v13.0 testplan

V13_IOL_NVMe_MI_01.03_MCTP-TO-MsgTag.sh

Objective:

Verify tag owner and message tag fields remain the same for all packets from SOM through EOMMCTP Tag Owner and Message Tag bits test

Pass/Fail:

See test 1.3 in the UNH-IOL NVMe-MI conformance v13.0 testplan

V13_IOL_NVMe_MI_01.04.01_MCTPBadPacket1.sh

Objective:

Verify unexpected MCTP middle and end packets are silently droppedMCTP Bad Packet 1 (invalid SOM/EOM combos) test

Pass/Fail:

See test 1.4.1 in the UNH-IOL NVMe-MI conformance v13.0 testplan

V13_IOL_NVMe_MI_01.04.02_MCTPBadPacket2.sh

Objective:

Verify MCTP packet with a bad message integrity check is silently droppedMCTP Bad Packet 2 (bad message integrity check) test

Pass/Fail:

See test 1.4.2 in the UNH-IOL NVMe-MI conformance v13.0 testplan

V13_IOL_NVMe_MI_01.04.03_MCTPBadPacket3.sh

Objective:

Verify MCTP packet with tag owner set to 0 is silently droppedMCTP Bad Packet 3 (TO=0) test

Pass/Fail:

See test 1.4.3 in the UNH-IOL NVMe-MI conformance v13.0 testplan

V13_IOL_NVMe_MI_01.04.04_MCTPBadPacket4.sh

Objective:

Verify MCTP packet with an unknown destination ID is silently droppedMCTP Bad Packet 4 (invalid destination EIDs) test

Pass/Fail:

See test 1.4.4 in the UNH-IOL NVMe-MI conformance v13.0 testplan

V13_IOL_NVMe_MI_01.04.05_MCTPBadPacket5.sh

Objective:

Verify MCTP packet with a bad header version is silently droppedMCTP Bad Packet 5 (bad header version) test

Pass/Fail:

See test 1.4.5 in the UNH-IOL NVMe-MI conformance v13.0 testplan

V13_IOL_NVMe_MI_02.01_MCTPCtrlInstanceID.sh

Objective:

Verify instance ID in MCTP request and response packets are the sameMCTP Control Instance ID test

Pass/Fail:

See test 2.1 in the UNH-IOL NVMe-MI conformance v13.0 testplan

V13_IOL_NVMe_MI_03.01_MCTPSetEndpointID.sh

Objective:

Verify MCTP Set Endpoint ID command response is correctly structuredMCTP Set Endpoint ID test

Pass/Fail:

See test 3.1 in the UNH-IOL NVMe-MI conformance v13.0 testplan

V13_IOL_NVMe_MI_03.02_MCTPGetMCTPVersion.sh

Objective:

Verify MCTP Get Version Support command returns the correct responseMCTP Get MCTP Version test

Pass/Fail:

See test 3.2 in the UNH-IOL NVMe-MI conformance v13.0 testplan

V13_IOL_NVMe_MI_03.03_MCTPGetMessageType.sh

Objective:

Verify MCTP Get Message Type command response is correctly structuredMCTP Get Message Type test

Pass/Fail:

See test 3.3 in the UNH-IOL NVMe-MI conformance v13.0 testplan

V13_IOL_NVMe_MI_03.04_MCTPPrepEndpointDisc.sh

Objective:

Verify MCTP Prepare for Endpoint Discovery command returns the correct responseMCTP Prepare for Endpoint Discovery test

Pass/Fail:

See test 3.4 in the UNH-IOL NVMe-MI conformance v13.0 testplan

V13_IOL_NVMe_MI_03.05_MCTPEndpointDisc.sh

Objective:

Verify MCTP Endpoint Discovery command returns the correct responseMCTP Endpoint Discovery test

Pass/Fail:

See test 3.5 in the UNH-IOL NVMe-MI conformance v13.0 testplan

V13_IOL_NVMe_MI_03.06_MCTPGetEndpointID.sh

Objective:

Verify MCTP Get Endpoint ID command response is correctly structuredMCTP Get Endpoint ID test

Pass/Fail:

See test 3.6 in the UNH-IOL NVMe-MI conformance v13.0 testplan

V13_IOL_NVMe_MI_04.01_InvalidOpcode.sh

Objective:

Verify MCTP command with invalid opcode returns the correct responseNVMe-MI Invalid Opcode test

Pass/Fail:

See test 4.1 in the UNH-IOL NVMe-MI conformance v13.0 testplan

V13_IOL_NVMe_MI_04.02_ReservedID.sh

Objective:

Verify Configuration Get command with reserved ID in configuration identifier field returns the correct responseNVMe-MI Reserved Identifier test

Pass/Fail:

See test 4.2 in the UNH-IOL NVMe-MI conformance v13.0 testplan

V13_IOL_NVMe_MI_04.03_HealthStatusChange.sh

Objective:

Verify Configuration Get Health Status Change command is successfulNVMe-MI Health Status Change test

Pass/Fail:

See test 4.3 in the UNH-IOL NVMe-MI conformance v13.0 testplan

V13_IOL_NVMe_MI_04.04_ReservedConfigID.sh

Objective:

Verify Configuration Set command with invalid ID in configuration identifier field returns the correct responseNVMe-MI Reserved Configuration ID test

Pass/Fail:

See test 4.4 in the UNH-IOL NVMe-MI conformance v13.0 testplan

V13_IOL_NVMe_MI_04.05_MAXRENTError.sh

Objective:

Verify Configuration Get Health Status Change command with invalid value in MAXRENT field returns the correct responseNVMe-MI MAXRENT Error test

Pass/Fail:

See test 4.5 in the UNH-IOL NVMe-MI conformance v13.0 testplan

V13_IOL_NVMe_MI_04.06_ResDataStructType.sh

Objective:

Verify Read NVMe-MI Data Structure command with invalid value in data structure type field returns the correct responseNVMe-MI Reserved Data Structure Type test

Pass/Fail:

See test 4.6 in the UNH-IOL NVMe-MI conformance v13.0 testplan

V13_IOL_NVMe_MI_04.07_InvalidVPDReadSize.sh

Objective:

Verify VPD Read command with differing length and offset combinations returns the correct responseNVMe-MI Invalid VPD Read Size test

Pass/Fail:

See test 4.7 in the UNH-IOL NVMe-MI conformance v13.0 testplan

V13_IOL_NVMe_MI_04.08_InvalidVPDWriteSize.sh

Objective:

Verify VPD Write command with differing length and offset combinations returns the correct responseNVMe-MI Invalid VPD Write Size test

Pass/Fail:

See test 4.8 in the UNH-IOL NVMe-MI conformance v13.0 testplan

V13_IOL_NVMe_MI_04.09_InvalidParamStatus.sh

Objective:

Verify NVMe-MI commands with invalid fields return the correct responseNVMe-MI Invalid Parameter Status test

Pass/Fail:

See test 4.9 in the UNH-IOL NVMe-MI conformance v13.0 testplan

V13_IOL_NVMe_MI_04.10_InvalidCommandSize.sh

Objective:

Verify Configuration Get MCTP Transmission Unit Size command with invalid length field returns the correct responseNVMe-MI Invalid Command Size test

Pass/Fail:

See test 4.10 in the UNH-IOL NVMe-MI conformance v13.0 testplan

V13_IOL_NVMe_MI_05.01_MessageType.sh

Objective:

Verify message type in the command response is correctNVMe-MI Message Type test

Pass/Fail:

See test 5.1 in the UNH-IOL NVMe-MI conformance v13.0 testplan

V13_IOL_NVMe_MI_05.02_MessageIC.sh

Objective:

Verify the correct behavior occurs based on the integrity check value in the command requestNVMe-MI Message Integrity Check test

Pass/Fail:

See test 5.2 in the UNH-IOL NVMe-MI conformance v13.0 testplan

V13_IOL_NVMe_MI_05.03_CRCCheck.sh

Objective:

Verify the CRC check in the command response passesNVMe-MI CRC Check test

Pass/Fail:

See test 5.3 in the UNH-IOL NVMe-MI conformance v13.0 testplan

V13_IOL_NVMe_MI_05.04_CommandSlot.sh

Objective:

Verify CSI field in request and response messages are the sameNVMe-MI Command Slot test

Pass/Fail:

See test 5.4 in the UNH-IOL NVMe-MI conformance v13.0 testplan

V13_IOL_NVMe_MI_05.05_ReqDataSizeMismatch.sh

Objective:

Verify the correct behavior occurs when the request data doesn’t match the specified data lengthNVMe-MI Request Data Size Mismatch test

Pass/Fail:

See test 5.5 in the UNH-IOL NVMe-MI conformance v13.0 testplan

V13_IOL_NVMe_MI_05.06_MCTPPacketPadding.sh

Objective:

Verify the correct response behavior occurs based on the command requests issuedNVMe-MI MCTP Packet Padding test

Pass/Fail:

See test 5.6 in the UNH-IOL NVMe-MI conformance v13.0 testplan

V13_IOL_NVMe_MI_05.07_MessageIntegCheck.sh

Objective:

Verify the correct behavior occurs based on the message integrity check value in the command requestNVMe-MI Message Integrity Check fail test

Pass/Fail:

See test 5.7 in the UNH-IOL NVMe-MI conformance v13.0 testplan

V13_IOL_NVMe_MI_06.01_ReservedFields.sh

Objective:

Verify the reserved fields in Dword 1 of the response to a command requestNVMe-MI Reserved Fields test

Pass/Fail:

See test 6.1 in the UNH-IOL NVMe-MI conformance v13.0 testplan

V13_IOL_NVMe_MI_06.02_ErrorResponseCode.sh

Objective:

Verify the correct error code is returned in the responseNVMe-MI Error Response Code test

Pass/Fail:

See test 6.2 in the UNH-IOL NVMe-MI conformance v13.0 testplan

V13_IOL_NVMe_MI_07.01_ResponseTag.sh

Objective:

Verify tag value in request and response messages are the sameNVMe-MI Response Tag test

Pass/Fail:

See test 7.1 in the UNH-IOL NVMe-MI conformance v13.0 testplan

V13_IOL_NVMe_MI_07.02_ResponseMessage.sh

Objective:

Verify various control primitive commands are successfulNVMe-MI Response Message test

Pass/Fail:

See test 7.2 in the UNH-IOL NVMe-MI conformance v13.0 testplan

V13_IOL_NVMe_MI_07.03_GetStatePrimResp.sh

Objective:

Verify Get State primitive command returns the correct state based on the conditions appliedNVMe-MI Get State Primitive Response test

Pass/Fail:

See test 7.3 in the UNH-IOL NVMe-MI conformance v13.0 testplan

V13_IOL_NVMe_MI_07.04_RespMessageReplay.sh

Objective:

Verify Replay primitive command functionalityNVMe-MI Response Message Replay test

Pass/Fail:

See test 7.4 in the UNH-IOL NVMe-MI conformance v13.0 testplan

V13_IOL_NVMe_MI_07.05_RespReplayOffset.sh

Objective:

Verify Replay primitive with a specified offset returns the expected response packetsNVMe-MI Response Replay Offset test

Pass/Fail:

See test 7.5 in the UNH-IOL NVMe-MI conformance v13.0 testplan

V13_IOL_NVMe_MI_08.01_ResponseHeader.sh

Objective:

Verify reserved fields and integrity check field in the response NVMe-MI Response Header test

Pass/Fail:

See test 8.1 in the UNH-IOL NVMe-MI conformance v13.0 testplan

V13_IOL_NVMe_MI_08.02_ConfigurationSet.sh

Objective:

Verify Configuration Set command with invalid ID in configuration identifier field returns the correct responseNVMe-MI Configuration Set test

Pass/Fail:

See test 8.2 in the UNH-IOL NVMe-MI conformance v13.0 testplan

V13_IOL_NVMe_MI_08.03_ConfigGetResponse.sh

Objective:

Verify Configuration Get command response is correctly structuredNVMe-MI Config Get Response test

Pass/Fail:

See test 8.3 in the UNH-IOL NVMe-MI conformance v13.0 testplan

V13_IOL_NVMe_MI_08.04_NVMSubsystemHealth.sh

Objective:

Verify NVM Subsystem Health Status Poll command response is correctly structuredNVMe-MI NVM Subsystem Health Status Poll test

Pass/Fail:

See test 8.4 in the UNH-IOL NVMe-MI conformance v13.0 testplan

V13_IOL_NVMe_MI_08.05_ControllerHealth.sh

Objective:

Verify Controller Health Status Poll command response is correctly structuredNVMe-MI Controller Health Status Poll test

Pass/Fail:

See test 8.5 in the UNH-IOL NVMe-MI conformance v13.0 testplan

V13_IOL_NVMe_MI_08.06_ReadDataStructure.sh

Objective:

Verify Read Data Structure command response is correctly structuredNVMe-MI Read Data Structure test

Pass/Fail:

See test 8.6 in the UNH-IOL NVMe-MI conformance v13.0 testplan

V13_IOL_NVMe_MI_08.07_DataLength.sh

Objective:

Verify Read Data Structure NVM Subsystem Info command response has the correct lengthNVMe-MI Data Length test

Pass/Fail:

See test 8.7 in the UNH-IOL NVMe-MI conformance v13.0 testplan

V13_IOL_NVMe_MI_09.01_MandatoryAdminCmds.sh

Objective:

Verify Identify, Get Features and Get Log Page commands are successfulNVMe-MI Mandatory Admin Commands test

Pass/Fail:

See test 9.1 in the UNH-IOL NVMe-MI conformance v13.0 testplan

V13_IOL_NVMe_MI_10.01_IdentifyMECap.sh

Objective:

Decode the Management Endpoint Capabilities field in the Identify Controller responseNVMe-MI Identify Controller Management Endpoint Capabilities test

Pass/Fail:

See test 10.1 in the UNH-IOL NVMe-MI conformance v13.0 testplan

V13_IOL_NVMe_MI_10.02_IdentifyCap.sh

Objective:

Verify reserved fields in the Management Endpoint Capabilities field in the Identify Controller response are set to zeroNVMe-MI Identify Controller Management Endpoint Capabilities reserved fields test

Pass/Fail:

See test 10.2 in the UNH-IOL NVMe-MI conformance v13.0 testplan

V13_IOL_NVMe_MI_10.03_NamespaceMetadata.sh

Objective:

Verify Namespace Metadata functionalityNVMe-MI Namespace Metadata test

Pass/Fail:

See test 10.3 in the UNH-IOL NVMe-MI conformance v13.0 testplan

V13_IOL_NVMe_MI_11.01_VPDDefaultValues.sh

Objective:

Verify reserved fields in the Common Header element in the VPD Read response are set to zeroNVMe-MI VPD Default Values test

Pass/Fail:

See test 11.1 in the UNH-IOL NVMe-MI conformance v13.0 testplan

V13_IOL_NVMe_MI_12.01_PCIeReset.sh

Objective:

Verify PCIe Reset functionalityNVMe-MI PCIe Reset test

Pass/Fail:

See test 12.1 in the UNH-IOL NVMe-MI conformance v13.0 testplan