OCP_2_6_Group_1

DSSD_26_Firmware_Upgrade_Test_Case.py

This script will run the following tests:

1. Verify that the device supports upgrading the Old firmware with the New firmware from the latest release for the very first time.

2. Verify that the device does not suffer any data loss or destruction during the Firmware Upgrade processing.

Note: Any failures encountered must be inspected before running other OCP scripts. Therefore, if a failure occurs, any subsequent OCP scripts in the suite will not be automatically started.

Pass/Fail: Script passes if all tests pass

Open Compute Project Datacenter NVMe SSD Spec v2.5 requirements referenced by this script:

FWUP-11